There are many ways to improve the condition of asphalt. Several methods are used for this
purpose, including crack repair, pothole repair, and resurfacing. For example, crack repairs
require the use of a heat lance and a torch. Resurfacing also requires the use of a hose and
power washer to clean the surface. A thorough drying is required after each step. Once the
surface is repaired, a new coat of asphalt can be applied.
Driveway paving requires the proper material for the driveway. The surface course of the
driveway should be made of asphalt concrete, which should be installed in one or two lifts.
Ensure that the edging is straight and follows the true line of the garage. Then, begin rolling,
adjusting the pressure of the roller until all of the marks are gone. Compaction must be done
properly, or the final result may be uneven. It is best to use a level surface and avoid sharp